← DoorsDownload PDF
Product Data Sheet
Summit · NFRC certified · October 2026
NFRC
Certified
West · CPD ZHM-M-5-00012-00001
Southwest · CPD ZHM-M-5-00004-00001
Doors

Sliding Door

128 Series thermal-break aluminum · three tracks · NFRC certified · West and Southwest

Sliding Door

The system

A three-track thermally broken sliding door on the 128 Series platform, certified and listed with the NFRC. Panels slide to both sides.

Construction

Frame depth193 mm (3-track)
TracksThree
OpeningBoth sides slide
Profile wall2.0 mm, 6063-T5
Thermal breakPolyamide struts
FinishAkzoNobel Interpon powder coat,
AAMA 2604; 2605 and dual-color to order
HardwareRoto locking; Coastal 316 stainless handle; rollers

NFRC certified performance

LevelU-factorSHGCVT
WestTriple glazed0.280.230.37
SouthwestDouble glazed0.370.190.39

Both levels NFRC certified. West CPD ZHM-M-5-00012-00001, for California Title 24 (U 0.27, SHGC 0.23), met by area-weighted average. Southwest CPD ZHM-M-5-00004-00001, meets 2021 IECC zone 2 (U 0.40, SHGC 0.25) for Texas and Arizona.

Sizes

 InchesMillimeters
Max panel width59″1500
Max panel height137 3/4″3500
Min panel23 5/8″ × 70 7/8″600 × 1800
Max panel weight809 lb367 kg
Max glass, one panel56.5 sq ft5.25 m²

Reference sizes; larger on request, case by case.

Configurations

Three track

Glazing

WestTriple glazed: 6 mm Low-E double silver + 12 mm argon + 6 mm clear + 12 mm argon + 6 mm Low-E double silver
SouthwestDouble glazed, Low-E, argon filled, as certified
SpacerWarm edge
GlassTempered, every lite
Not an egress door
Doors are not egress
ARI does not specify a sliding door as an egress opening. Bedroom egress is served by a casement.
West units are triple glazed with two Low-E coatings; Southwest units are double glazed. Every lite is tempered, as certified.

Finish

Matte Black
White
Dark Bronze

AkzoNobel Interpon powder coat, AAMA 2604, inside and out. Custom colors, AAMA 2605 and dual-color frames (a different color inside and outside) at an additional charge.

How a Summit unit is ordered

01
Send the schedule
The window and door schedule or a takeoff with opening sizes, the elevations so mulled runs price as assemblies, and the finish inside and out.
02
Approve the drawings
Shop drawings are issued for every opening and signed before any aluminum is cut.
03
Production and delivery
40 days production, then about 30 days ocean transit to the warehouse.
ARI MATERIALS  ·  5900 Balcones Drive, Suite 100, Austin, Texas 78731
(480) 882-8815  ·  meridianwindowsystems.com
Profile Sections
Summit · 128 Series Sliding Door · October 2026
Doors · Sliding Door

Profile sections

Drawn from the production die on the 128 Series platform. All dimensions in millimeters.

Plan section
Plan section
Head & sill — vertical
Vertical section

Reading the section

193Frame depth, three tracks

Remaining figures on the sections are internal profile and gasket dimensions, issued with the approved shop drawings.

Glazing make-up — West

Outer lite6 mm Low-E double silver
Cavity12 mm argon, warm-edge spacer
Center lite6 mm clear
Cavity12 mm argon, warm-edge spacer
Inner lite6 mm Low-E double silver
SouthwestDouble glazed, Low-E, argon
All litesTempered

Installation

SillMulti-track sill with weep system
RollersAdjustable
Summit — limited warranty
Frame, sash, welds10 years
Insulating glass seal10 years
Finish — AAMA 260415 years
Finish — AAMA 2605, to order20 years
Hardware and screens10 years

Also in Summit

Fixed80 Series (K80)
Casement80 Series (K80)
Swing door80 Series
Tilt & turn80 Series (YKT80A)
Sliding door128 Series
Sections are supplied for detailing only and are not shop drawings. Approved shop drawings are issued for every order before manufacturing.

Summit thermal values are NFRC certified. Each product and level carries its own CPD number, which a dealer or plan checker can look up in the NFRC Certified Products Directory.
ARI MATERIALS  ·  5900 Balcones Drive, Suite 100, Austin, Texas 78731
(480) 882-8815  ·  meridianwindowsystems.com
← DoorsDownload PDF